SERVICES
Put power to the ground with
Suspension Tuning and  Extra Horsepower
Fork/Shock Service
Fork/Shock Rebuild and Revalve
Cylinder Porting
Exhaust Systems
Race Cams and Big Bore Kits

Gain extra advantage with Enzo Air Subtanks
The ENZO SUBTANK SYSTEM adds "speed sensitivity" to the fork spring.
When the fork compresses at slower speeds, it gives the smooth, plush action of a low oil level.
When the fork compresses at higher speeds, it gives the firm, progressive action of a high oil level.




Suspension Tuning

At Shock Therapy a basic rebuild will include disassemble, clean replace the oil and inspect your suspension components to ensure everything is working properly. Or we can revalve and fine tune your hi speed and low speed compression and rebound damping for your weight and riding style by replacing shims, washers, oil and springs as required. We can also include in your suspension set-up state of the art components such as Race Tech's Gold Valves and cartridge emulators.

Fork and shock technology has come a long way in recent years. The internals vary from early to late model bikes and even from bike to bike, especially on forks. Therefore, prices may vary depending on your bike, condition of components and your needs. Feel free to call and we will do our best to quote you a price over the phone. Prices below may not include parts.


forks16.gif (41928 bytes)

 


Suspension Labor (Dirt/Off Road)

Forks

  • REBUILD: Showa/KYB/KTM (WP)
    Disassemble, clean and inspect parts, change oil........................$85*

  • REVALVE: Showa/KYB/KTM (WP)
    Disassemble, clean and inspect parts, revalve, change oil.............$165*

*Prices do not include parts


Shocks

  • REBUILD: Showa, KYB
    Disassemble, clean and inspect parts, change oil.........................$85*

  • REBUILD: WP, KTM (PDS)
    Disassemble, clean and inspect parts, change oil.........................$95*

  • REVALVE: Showa, KYB

  • Disassemble, clean and inspect parts, revalve, change oil.............$165.00*

  • REVALVE: WP, KTM (PDS).......................................................$180.00*

*Prices do not include parts

 

Suspension Parts
Click Here


Suspension Labor (Street)

Forks

  • REBUILD:
    Disassemble, clean and inspect parts, change oil.........................$95*

  • REVALVE.................................................................................$185.00*

 

Shocks

  • REBUILD:
    Disassemble, clean and inspect parts, change oil.........................$95*

  • REVALVE.................................................................................$185.00*

*Prices do not include parts

 

 

Click here for a suspension order form

Horsepower

cylind.jpg (19020 bytes)

2-Stroke cylinder porting.......$180
Head Mod's; resurface, mill, revise squish.....$ 75
Transfer Case Match including split cases........$225


2 Stroke Cylinder Porting
Specify your power band preference;
more LOW end
more TOP end
OR
spread it evenly from top to bottom




4 Stroke Race Cams and Exhaust Systems


Also avaliable, steel sleeve cylinder boring, honing repair,
Wiesco piston kits Cometic gaskets and more


WEB PAGE BY FRANK